Convertible Top Removal/Installation

CONVERTIBLE TOP REMOVAL/INSTALLATION

1. Cover both sides of the rear window glass with thick cloth to protect the window.
2. Remove the following parts:
1. Console
2. Quarter trim
3. Scuff plate
4. Tire house trim
5. Aeroboard
6. Front seat back bar garnish
7. Back trim
8. Seat belt set plate
9. Seat back crossmember assembly
10. Rear side trim
11. Rear package trim
12. Side shelf
13. Seat belt upper anchor installation bolt

3. Disconnect the rear window defroster connector.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.






Convertible Top Removal Note
1. Unlock the top lock.

Convertible Top Installation Note






1. Insert the rain rail into the beltline molding lip, and install it over the studs.






2. Install the link bracket to the stud bolts with no gaps (a) on the mating surfaces, then tighten the bolts and nut.

Tightening torque
19-25 N.m {1.9-2.6 kgf.m, 14-18 ft.lbf}