Drain Cover Removal/Installation
DRAIN COVER REMOVAL/INSTALLATIONExcept Power Retractable Hardtop
1. Remove the following parts:
1. Console
2. Quarter trim
3. Scuff plate
4. Tire house trim
5. Aeroboard
6. Front seat back bar garnish
7. Back trim
8. Seat belt set plate
9. Seat back crossmember assembly
10. Rear side trim
11. Rear package trim
12. Side shelf
13. Seat belt upper anchor installation bolt
14. Convertible top
15. Beltline protector
16. Retractor screen
2. Remove the fasteners.
3. Pull the drain cover upward and detach from the drain valve.
4. Remove the drain cover.
5. Detach the tabs of the drain valve from below the vehicle.
6. Remove the drain valve.
7. Install in the reverse order of removal.
Power Retractable hardtop
1. Fully open the deck panel.
2. Remove the following parts:
1. Console
2. Quarter trim
3. Scuff plate
4. Tire house trim
5. Aeroboard
6. Front seat back bar garnish
7. Back trim
8. Seat belt upper anchor installation bolt
9. Seat belt set plate
10. Rear side trim
11. Side shelf
12. Power retractable hardtop link bracket
13. Cab-side weatherstrip
14. Power retractable hardtop
3. Remove the fastener and clip A.
4. Pull the drain cover upward and detach from the drain valve.
5. Remove the upper drain cover and lower drain cover.
6. Detach the tabs of the drain valve from below the vehicle.
7. Remove the drain valve.
8. Install in the reverse order of removal.