Camshaft Bearing

Camshaft Bearing Caps

Apply the gear oil (SAE No. 90 or equivalent) to each journal of the camshaft as shown in the figure.
Temporarily tighten the camshaft bearing caps evenly in two or three steps.
Tighten the camshaft cap bolts in the order shown with the following two steps.
Tighten to 5.0-9.0 N-m (51.0-91.7 kgf-cm, 44.3-79.6 in-lbf)
Tighten to 14.0-17.0 N-m (1.5-1.7 kgf-m, 10.4-12.5 ft-lbf)