Oil Seal (Oil Pump) Replacement

OIL SEAL (OIL PUMP) REPLACEMENT [SJ6A-EL]

1. Remove the automatic transmission.

Caution:
^ The oil seal is easily damaged by the sharp edges of the torque converter splines. Do not let the splines contact the oil seal.
^ Do not drop the torque converter.
^ Do not pinch fingers.

2. Remove the torque converter.

Caution:
^ Do not to damage the bushing on the oil pump body.





3. Remove the oil seal from the oil pump body using the SST.





4. Using the SST and a hammer, install the new oil seal to the oil pump body.
5. Coat the lip of the oil seal with grease.
6. Install the torque converter.
7. Install the automatic transmission.
8. Perform the mechanical system test. (See MECHANICAL SYSTEM TEST [SJ6A-EL].) Mechanical System Test