Assembly Procedure

Assembly Procedure
1. Apply ATF to the new O-rings.





2. Install the O-rings to the B1 brake piston.
3. Apply ATF to the B1 brake piston and the B1 brake cylinder.

Caution: Do not damage the O-ring.





4. Install the B1 brake piston to the B1 brake cylinder.
5. Apply ATF to the new O-rings.





6. Install the O-rings to the B3 brake piston.
7. Apply ATF to the B3 brake cylinder to the B3 brake piston.

Caution: Do not damage the O-ring.





8. Install the B3 brake piston to the B3 brake cylinder.





9. Install the piston return spring to the B3 brake piston.





10. While holding the snap ring with a finger, install it to the brake cylinder using a flathead screwdriver.
11. Apply ATF to the thrust washer.
12. Install the bearing race to the thrust washer.





13. Install the F1 one-way clutch to the bearing race.





14. Install the B3 brake cylinder to the F1 one-way clutch.