Clutch Cover Inspection

CLUTCH COVER INSPECTION





1. Measure the wear of the diaphragm spring fingers.
^ If it exceeds the maximum specification, replace the clutch cover.

Clutch disc maximum depth
0.6 mm (0.024 in)





2. Measure the flatness of the pressure plate with a straight edge and a feeler gauge.
^ If it exceeds the maximum specification, replace the clutch cover.

Clutch cover maximum clearance
0.5 mm (0.020 in)

3. When checking the diaphragm spring fingers, mount a dial indicator on the cylinder block.





4. Rotate the flywheel and check for misaligned diaphragm spring fingers.
^ If it exceeds the maximum specification, replace the clutch cover.

Clutch cover maximum height difference
1.0 mm (0.039 in)