[M15M-D] Manual Transmission

OIL SEAL (EXTENSION HOUSING) REPLACEMENT [M15M-D]

1. Position the vehicle on level ground.
2. Drain the transmission oil.
3. Remove the following parts:
1) Member bracket
2) Tunnel member
3) Catalytic converter, middle pipe
4) Propeller shaft





4. Remove the oil seal using a flathead screwdriver.





5. Tap a new oil seal into the case using the SST.
6. Apply the specified oil to the oil seal lip.
7. Install in the reverse order of removal.
8. Add transmission oil.