Fuel Pump Ballast Resistor: Service and Repair

FUEL PUMP RESISTOR REMOVAL/INSTALLATION[L3 WITH TC]
1. Remove the battery cover.
2. Disconnect the negative battery cable.




3. Remove the air cleaner.
4. Disconnect the fuel pump resistor connector.
5. Remove in the fuel pump resistor.




6. Install in the order as shown in the figure.

Tightening torque : 7.8-11.8 Nm {80-120 kgfcm, 70-104 in-lbf}

7. Connect the fuel pump resistor connector.