Reading Diagnostic Trouble Codes

Reading DTCs Procedure





1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
^ When using the IDS (laptop PC)
1. Select "Self Test".
2. Select "Modules".
3. Select "TPM".
^ When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "TPM".
3. Select "Self Test".
3. Verify the DTC according to the directions on the screen.
^ If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
4. After completion of repairs, clear all DTCs stored in the TPMS.