Sunroof / Moonroof Motor: Service and Repair

SUNROOF MOTOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Roof side trim
2. A-pillar trim
3. Rear seat
4. Inner scuff plate
5. Tire house trim
6. Rear pillar trim
7. Map light
8. Interior light
9. Sunvisor
10. Assist handle
11. Headliner






3. Disconnect the sunroof motor connector.
4. Remove the screws, then remove the sunroof motor.
5. Install in the reverse order of removal.

NOTE: If the glass panel or the sunroof motor is moved with the sunroof motor removed, initial position setting of the sunroof motor will be required.Perform initial position setting referring to the Sunroof Motor Assembly Note.