Seat Temperature Element: Testing and Inspection
SEAT WARMER INSPECTIONSeat Cushion
1. Remove the front seat.
2. Remove the seat cushion trim.
3. While inspecting for continuity between the terminals A and B of the connector, use a dryer to warm the thermostat of the seat warmer unit on seat cushion.
4. Verify that the continuity between the seat warmer terminals is as indicated in the table.
- If not as indicated in the table, replace the seat warmer unit.
Seat Back
1. Remove the front seat.
2. Verify that the continuity between the seat warmer terminals is as indicated in the table.
- If not as indicated in the table, replace the seat warmer unit.
