Operation CHARM: Car repair manuals for everyone.

[SJ6A-El] Transmission/Transaxle

AFTER REPAIR PROCEDURE [SJ6A-EL]

Caution
^ After repairing a malfunction, perform this procedure to verify that the malfunction has been corrected.
^ When this procedure is carried out, be sure to drive the vehicle at lawful speed and pay attention to the other vehicles.






1. Connect the M-MDS to the vehicle DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
^ When using the IDS (laptop PC)
1. Select "Self Test".
2. Select "Modules".
3. Select "TCM".

^ When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "TCM".
3. Select "Self Test".

3. Verify the DTC according to the directions on the screen.
4. Press the clear button on the DTC screen to clear the DTC.
5. Perform the following trouble code inspections to ensure that the DTC has been resolved:








6. Gradually slow down and stop the vehicle.
7. Make sure that no DTCs occur.