Clutch Pedal Assembly: Service and Repair

CLUTCH PEDAL REMOVAL/INSTALLATION

1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. Inspect and adjust the clutch pedal.
(See CLUTCH PEDAL INSPECTION/ADJUSTMENT.) Testing and Inspection





Starter Interlock Switch Installation Note

Caution
^ If the rod is pushed in, it may not operate properly. Be careful not to push the rod in when installing the starter interlock switch.

1. Insert a new starter interlock switch into the pedal bracket hole in direction A.
2. While pushing the starter interlock switch in direction A, slide it in direction B until it locks securely.





3. Move the clutch in a fully open stroke in direction C and securely fit the terminal of the starter interlock switch.