5. Main Drive Gear and Mainshaft Component Disassembly
MAIN DRIVE GEAR AND MAINSHAFT COMPONENT DISASSEMBLYNote: Measure the thrust and radial clearance of 1st, 2nd and reverse gear before disassembly.
1. Disassemble in the order indicated in the table.
Bearing Disassembly Note
1. Remove the bearing using the SST.
1st Gear Disassembly Note
1. Shift the clutch hub component (1st/2nd) to the 2nd gear.
2. Remove the 6th gear, bearing and 1st gear together using the SST and a press.
2nd Gear Disassembly Note
1. Remove the clutch hub component (1st/2nd) and 2nd gear together using the SST and a press.
Reverse Gear Disassembly Note
1. Remove the clutch hub component (5th/reverse) and reverse gear together using the SST and a press.