Component Tests and General Diagnostics

DIAGNOSTIC ASSIST FUNCTION [AUDIO]

Structural View

Buttons










Information Display Inspection

1. With the audio power on, press the POWER/VOLUME button and simultaneously press the TRACK/SEEK/CAT/H button (up) for approx. 1 s.

2. Inspect according to the following table:






3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.

Button Inspection

1. With the audio power on, press the POWER/VOLUME button and simultaneously press the CLOCK button for approx. 1 s.

2. Inspect according to the following table:






3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.

Speaker Inspection

1. With the audio power on, press the POWER/VOLUME button and simultaneously press the TUNE/TEXT/AUTO-M button for approx. 1 s.

2. Inspect according to the following table:






3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.

Radio Reception Condition Inspection

1. With the audio power on, press the POWER/VOLUME button and simultaneously press the Preset button 2 button for approx. 1 s.

2. Inspect according to the following table:

CAUTION:
- Even if the system is normal, radio reception may be difficult depending on where the system is inspected (indoors/outdoors, or conditions at the location). Before inspecting the system, verify that radio reception is adequate.
- When inspecting, select a frequency band (radio station) with the best reception.





3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.