Fog/Driving Lamp: Service and Repair
FRONT FOG LIGHT REMOVAL/INSTALLATION
4 DOOR
Standard type
1. Disconnect the negative battery cable.
2. Remove the under cover.
3. Slightly bend back the mudguard.
4. Disconnect the connector.
5. Remove the screws.
6. Remove tabs and then remove the front fog light.
7. Install in the reverse order of removal.
8. Adjust the front fog light aiming. Adjustments
Sport Type
1. Disconnect the negative battery cable.
2. Remove the under cover.
3. Slightly bend back the mudguard.
4. Disconnect the connector.
5. Remove the screws.
6. Remove tabs and then remove the front fog light.
7. Install in the reverse order of removal.
8. Adjust the front fog light aiming. Adjustments
5 DOOR
1. Disconnect the negative battery cable.
2. Remove the under cover.
3. Slightly bend back the mudguard.
4. Disconnect the connector.
5. Remove the screws.
6. Remove the front fog light.
7. Install in the reverse order of removal.
8. Adjust the front fog light aiming. Adjustments
Mazdaspeed3
1. Disconnect the negative battery cable.
2. Remove the under cover.
3. Slightly bend back the mudguard.
4. Disconnect the connector.
5. Remove the screws.
6. Remove the front fog light.
7. Install in the reverse order of removal.
8. Adjust the front fog light aiming. Adjustments