Clutch Pedal Assembly: Service and Repair

CLUTCH PEDAL REMOVAL/INSTALLATION

CAUTION:
- Fluid will damage painted surfaces. Be careful not to spill any on painted surfaces. If it is spilled, wipe it off immediately.

1. Remove the battery and battery tray.
Removal and Replacement
Removal and Replacement

2. Separate the steering shaft.

3. Separate the clutch pipe and reserve hose.
Service and Repair

4. Remove in the order indicated in the table.

5. Install in the reverse order of removal.

6. Bleed the air from the system. Service and Repair

7. After installation, inspect the clutch pedal. Testing and Inspection










Starter Interlock Switch Installation Note

1. Insert the new starter interlock switch into the pedal bracket hole in the direction indicated by arrow A.






2. Slide the starter interlock switch pressing it in the direction indicated by arrow B until it is locked.






3. Press the clutch pedal fully in the direction indicated by arrow C and adjust the starter interlock switch terminal.

Clutch Pedal Position Switch Installation Note

1. Insert the new clutch pedal position switch into the pedal bracket hole until the switch stops.

2. Rotate the clutch pedal position switch 45° clockwise.






3. Verify that the clutch pedal position switch is locked securely.