Neutral Switch Removal/Installation [G35M-R]
NEUTRAL SWITCH REMOVAL/INSTALLATION [G35M-R]
1. Remove the under cover.
2. Remove the No.1 engine mount rubber and No.1 engine mount bracket.
3. Remove the neutral switch.
4. Install the neutral switch (with a new packing) to the transaxle case.
Tightening torque
- 19.6-29.4 Nm
{2.0-2.9 kgf-m, 14.5-21.6 ft-lbf}
5. Install the No.1 engine mount bracket.
Tightening torque
- 93.1-116.6 Nm
{9.5-11.8 kgf-m, 68.7-85.9 ft-lbf}
6. Install the No.1 engine mount rubber. Manual Transaxle Removal/Installation [G35M-R]
7. Install the under cover.