Headliner: Service and Repair

HEADLINER REMOVAL/INSTALLATION

1. Shift to the D (ATX) or 4th gear (MTX) position. (4 door)

2. Disconnect the negative battery cable.

3. Partially peel back the seaming welts.

4. Remove the following parts:
a. Sunroof seaming welt (vehicles with sunroof)

b. Console (4 door) Removal and Replacement

c. A-pillar trim A-Pillar Trim Removal/Installation

d. Upper anchor of the front seat belt Front Seat Belt Removal/Installation

e. Front scuff plate Front Scuff Plate Removal/Installation

f. Rear scuff plate Rear Scuff Plate Removal/Installation

g. B-pillar lower trim B-Pillar Lower Trim Removal/Installation

h. B-pillar upper trim B-Pillar Upper Trim Removal/Installation

i. Rear seat Rear Seat Removal/Installation

j. Tire house trim Tire House Trim Removal/Installation

k. Trunk side upper trim (5 door)

l. C-pillar trim C-Pillar Trim Removal/Installation

m. Map light Service and Repair

n. Interior light Service and Repair

o. Sunvisor Service and Repair

p. Assist handle Service and Repair

5. Disconnect the roof wiring harness connector and remove the roof wiring harness connector clip from the body.

6. Disconnect the rear washer hose. (5 door)

7. Remove the fasteners.











8. Detach the tab from the roof panel and remove the headliner.

9. Take the headliner out from the opened front passenger-side door. (4 door)






10. Take the headliner out from the opened liftgate. (5 door)






11. Install in the reverse order of removal.