FN4A-EL Transmission

AFTER REPAIR PROCEDURE [FN4A-EL]

CAUTION:
- After repairing a malfunction, perform the following procedure to verify that the malfunction has been corrected.
- When performing this procedure, be sure to drive the vehicle at lawful speed and pay attention to the other vehicles.

1. Connect the M-MDS to the DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

- Select "Self Test".
- Select "Modules".
- Select "PCM".
- Select "Retrieve CMDTCs".

- When using the PDS (Pocket PC)

- Select "Module Tests".
- Select "PCM".
- Select "Self Test".
- Select "Retrieve CMDTCs".

3. Verify the DTC according to the directions on the M-MDS screen.

4. Press the clear button on the DTC screen to clear the DTC.

5. Perform the following DTC inspections to ensure that the DTCs have been resolved:

P0706-P0715:

P0720-P0733:

P0734-P0745:

P0751-P1783:

P0756-P0766:

P0761-P0762:

P0767-P0771:

P0772-P0894:

6. Gradually slow down and stop the vehicle.

7. Make sure that the repaired DTC does not recur.