Rain Sensor: Service and Repair
RAIN SENSOR REMOVAL/INSTALLATION
CAUTION:
- The reflection rate at the moment the ignition switch is first turned on after replacing the rain sensor with a new one is stored as the condition indicating zero precipitation on the windshield. Therefore, before turning on the ignition switch, remove water and dirt from the windshield.
- In addition, rain sensor initialization is performed for the following cases: Testing and Inspection
- The windshield is replaced and the rain sensor is reused.
- The auto wiper system operates incorrectly.
- The rain sensor is integrated with the auto light sensor as a single unit.
1. Disconnect the negative battery cable.
2. Remove the rearview mirror cover. Rearview Mirror Removal/Installation
3. Disconnect the rain sensor connector.
4. Slide the tab in the direction of the arrow and remove the rain sensor.
5. Install in the reverse order of removal.