Rear Washer Hose Removal/Installation

REAR WASHER HOSE REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Slightly bend back the mudguard (RH).

3. Disconnect the rear washer hose A from the washer tank.

4. Remove rear washer hose A from clips A.






5. Remove A-pillar trim (RH). A-Pillar Trim Removal/Installation

6. Remove the glove compartment. (See Service and Repair)

7. Remove the dashboard garnish. (See Dashboard Garnish Removal/Installation)

8. Disconnect joint pipe, then remove the rear washer hose A.

9. Remove rear washer hose B from the clips B.

10. Remove the following parts:
a. Upper anchor of the front seat belt Front Seat Belt Removal/Installation

b. Front scuff plate Front Scuff Plate Removal/Installation

c. Rear scuff plate Rear Scuff Plate Removal/Installation

d. B-pillar lower trim B-Pillar Lower Trim Removal/Installation

e. B-pillar upper trim B-Pillar Upper Trim Removal/Installation

f. Rear seat Rear Seat Removal/Installation

g. Tire house trim Tire House Trim Removal/Installation

h. Trunk side upper trim

i. C-pillar trim C-Pillar Trim Removal/Installation

j. Map light Service and Repair

k. Sunvisor Service and Repair

l. Assist handle Service and Repair

11. Disconnect the joint pipe B.






12. Remove the headliner. (See Service and Repair)

13. Remove rear washer hose B and the tapes.

14. Remove clips C from the body.

15. Disconnect the joint pipe C, then remove rear washer hose C.

16. Remove rear washer hose D from the rear washer nozzle.

17. Install in the reverse order of removal.