Entertainment Systems: Service and Repair

CONDENSER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Rear package tray lid ( See Service and Repair.)

b. Third-row seat ( See Third-Row Seat Removal/Installation.)

c. Rear scuff plate ( See Rear Scuff Plate Removal/Installation.)

d. Trunk end trim Trunk End Trim Removal/Installation

e. Lower anchor of the third-row seat belt Third-Row Seat Belt Removal/Installation

f. Cargo compartment light Service and Repair

g. Trunk side trim

3. Remove in the order indicated in the table.










4. Install in the reverse order of removal.