Initial Inspection and Diagnostic Overview

SELF-DIAGNOSTIC [CAR-NAVIGATION SYSTEM]

Starting Procedure For Diagnostic Function

1. Turn the ignition switch to ON position.

2. Press the MENU button.

3. Select "Navigation Set Up".

4. Select "Calibration".

5. Select "Map Version".

6. Press upper left of screen 2 times, then press lower left of it 2 times.

7. Press "Menu" button of "Diagnosis Check" screen.

8. Perform following procedures according to the purpose of the check item.

If inspecting vehicle condition signals:
- Select "Vehicle Signal".










*
It is used for symptom troubleshooting. (Troubleshooting index No.4, No.5, No.7 and No.8)

If inspecting microphone related signals:

1. Select "Navigation Check Menu".

2. Select "Microphone Check".










*
It is used for symptom troubleshooting. (Troubleshooting index No.8)

If inspecting gyro sensor signals:

1. Select "Navigation Check Menu".

2. Select "Vehicle Sensors".