Front Door Latch: Service and Repair

FRONT DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. Inner garnish Inner Garnish Removal/Installation

b. Front door trim Front Door Trim Removal/Installation

c. Front door glass Front Door Glass Removal/Installation

d. Front door speaker Front Door Speaker Removal/Installation

e. Front inner handle Service and Repair

f. Front door module Front Door Module Removal/Installation

4. Remove in the order indicated in the table.










5. Install in the reverse order of removal.

Connector Removal Note

1. Pull the stopper of the front door lock actuator connector in the direction of the arrow (1).

2. Disconnect the front door lock actuator connector while pushing at point A.