Carpet: Service and Repair

FLOOR COVERING REMOVAL/INSTALLATION

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. Front seat Front Seat Removal/Installation

b. Second-row seat Second-Row Seat Removal/Installation

c. Rear package tray lid Service and Repair

d. Sub-trunk

e. Third-row seat Third-Row Seat Removal/Installation

f. Center console Center Console Removal/Installation

g. Center console bracket

h. Front scuff plate inner Front Scuff Plate Removal/Installation

i. Front side trim Front Side Trim Removal/Installation

j. Side wall Side Wall Removal/Installation

k. Front console Front Console Removal/Installation

l. Dust cover Service and Repair

m. Rear scuff plate Rear Scuff Plate Removal/Installation

n. B-pillar lower trim B-Pillar Lower Trim Removal/Installation

o. Trunk end trim Trunk End Trim Removal/Installation

p. Third-row seat belt lower anchor installation bolt Third-Row Seat Belt Removal/Installation

q. Cargo compartment light Service and Repair

r. Trunk side trim

4. Remove fastener A, B, and C.






5. Take the floor covering out from the opened liftgate.

6. Install in the reverse order of removal.