Power Sliding Door Module: Service and Repair

SLIDING DOOR MODULE REMOVAL/INSTALLATION

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. Side door garnish Side Door Garnish Removal/Installation

b. Rear side trim Rear Side Trim Removal/Installation

c. Sliding door trim Service and Repair

d. Sliding door glass Sliding Door Glass Removal/Installation

e. Sliding door lock actuator Sliding Door Lock Actuator Removal/Installation

4. Disconnect the power window motor connector.

5. Remove the bolts, then remove the constant power supply wiring harness protector.






6. Remove screws A and the fastener.






7. Remove the sliding door module.

8. Install in the reverse order of removal.