Glove Box Lamp: Service and Repair

GLOVE COMPARTMENT LIGHT BULB REMOVAL/INSTALLATION

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. Side wall (See Side Wall Removal/Installation)

b. Front console (See Front Console Removal/Installation)

c. Front scuff plate inner (Passenger's side) (See Front Scuff Plate Removal/Installation)

d. Front side trim (Passenger's side) (See Front Side Trim Removal/Installation)

e. Side panel (Passenger's side) (See Side Panel Removal/Installation)

f. Glove compartment (See Service and Repair)

4. Remove the socket, then remove the glove compartment light bulb.






5. Install in the reverse order of removal.