Auxiliary Power Outlet: Service and Repair

ACCESSORY SOCKET REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Rear package tray lid ( See Service and Repair.)

b. Third-row seat ( See Third-Row Seat Removal/Installation.)

c. Rear scuff plate ( See Rear Scuff Plate Removal/Installation.)

d. Trunk end trim Trunk End Trim Removal/Installation

e. Lower anchor of the third-row seat belt Third-Row Seat Belt Removal/Installation

f. Cargo compartment light Service and Repair

g. Trunk side trim

3. Remove in the order indicated in the table.










4. Install in the reverse order of removal.

Accessory Socket Removal Note

1. While pressing a tape-wrapped flathead screwdriver against the cap projection, pull the accessory socket outward.






Cap Removal Note

1. While pressing the tabs, pull the cap outwards.