On-Board System Readiness Tests Access Procedure

ON-BOARD DIAGNOSTIC TEST [L3]

On-Board System Readiness Tests Access Procedure

1. Connect the M-MDS to the DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

- Select "Powertrain".
- Select "OBD Test Modes".
- Select "Mode 1 Powertrain Data".
- Select "PCM".

- When using the PDS (Pocket PC)

- Select "OBDII Modes".
- Select "Mode 1 Powertrain Data".
- Select "PCM".

3. Then, select the "***SUP" and "**EVAL" PIDs in the PID selection screen.

4. Monitor those PIDs and check it system monitor is completed.