[Immobilizer System (Advanced Keyless Entry and Push Button Start System)]
SECURITY LIGHT: 13, DTC: B10D7:94/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
NOTE:
- If the BCM configuration and DTC inspection for the following modules are performed, the keyless control module will be temporarily unable to read the key code due to the signal from the M-MDS. As a result, DTC B10D7:94 is stored in the keyless control module.
- KOEO/KOER self test (PCM)
- ABS (DSC HU/CM)
- BCM
- EPS (EPS control module)
- RCM (SAS control module)
- RKE (keyless control module)
- FFH (water heater unit)
Possible Cause:
Diagnostic Procedure
