Navigation System: Application and ID

SUPPLIER IDENTIFICATION PROCEDURE [CAR-NAVIGATION SYSTEM]

NOTE:
- The supplier can vary with the module. When asking the supplier (service center) for repair or replacement, identify the supplier and fill in the Audio Repair Order Form with the following procedures.

Identification Using the Label or Inscribed Lettering

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Upper panel Upper Panel Removal/Installation

b. Decoration panel Decoration Panel Removal/Installation

c. Shift knob (MTX) Service and Repair

d. Shift panel Shift Panel Removal/Installation

e. Center panel lower Center Panel Lower Removal/Installation

f. Center panel upper Center Panel Upper Removal/Installation

g. Climate control unit Climate Control Unit Removal/Installation [Full-Auto Air Conditioner] Climate Control Unit Removal/Installation [Manual Air Conditioner]

h. Car-navigation unit Service and Repair

3. Verify the supplier by referring to the label attached to each unit.






Verify Using the Diagnostic Assist Function

1. Launch the diagnostic assist function. Diagnostic Assist Function [Car-Navigation System]

2. Press the "Diagnostic assist code input switch", and input the diagnostic assist code "06".






3. Select "ENTER".

4. Identify the supplier code by referring to the display.










5. Press the POWER/VOLUME switch to return to the diagnostic assist code input screen.

6. Press the POWER/VOLUME switch to release the diagnostic assist function.