Reverse Clutch Hub Inspection
Reverse Clutch Hub Inspection1. Inspect the clutch hub sleeve and hub operation.
^ If there is any malfunction, replace parts if necessary.
2. Inspect the gear teeth for damage, wear, and cracks.
^ If there is any malfunction, replace parts if necessary.
3. Measure the clearance between the hub sleeve and shift forks.
^ If it exceeds the maximum specification, replace the hub sleeve and shift fork as a set.
Reverse clutch hub sleeve and shift fork clearance
Standard: 0.10 - 0.40 mm (0.004 - 0.015 in)
Maximum: 0.90 mm (0.035 in)