Secondary 4TH Gear and Bearing Assembly Note

Secondary 4th Gear and Bearing Assembly Note





1. Install the secondary 4th gear and the bearing using the SST.





2. Measure the 1st gear thrust clearance using a dial indicator.

1st gear thrust clearance
Standard: 0.05 - 0.28 mm (0.002 - 0.011 in)
Maximum: 0.33 mm (0.013 in)





3. Measure the clearance between the 2nd gear and the secondary 3rd gear.
^ If it exceeds the maximum specification, reassemble the secondary shaft component.

2nd gear thrust clearance
Standard: 0.18 - 0.46 mm (0.007 - 0.018 in)
Maximum: 0.51 mm (0.020 in)