B0011:19
DTC B0011:11/B0011:12/B0011:19/B0011:1A/B0011:1B
System Malfunction Location
DTC B0011:1A-DTC B0011:19:
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Abnormal resistance (other than 1.5-4.1 ohms) detected in the passenger-side air bag module (inflator No.2) circuit
- Malfunction in the wiring harness between the passenger-side air bag module (inflator No.2) and SAS control module
Possible Causes
- Passenger-side air bag module (inflator No.2) connector malfunction
- Open or short circuit or short to ground or short to power supply in the wiring harness between the passenger-side air bag module (inflator No.2) and SAS control module
- Passenger-side air bag module (inflator No.2) malfunction
- SAS control module malfunction
System Wiring Diagram
Diagnostic Procedure
Step 1-Step 2:
Step 3-Step 4:
