B00D5:12
DTC B00D5:11/B00D5:12
System Malfunction Location
DTC B00D5:11-DTC B00D5:12:
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Malfunction in PAD indicator circuit
Possible Causes
- Open circuit in wiring harness between battery and PAD indicator
- A non-standard PAD indicator bulb is installed
- PAD indicator malfunction
- Open or short circuit or short to ground or short to power supply in wiring harness between PAD indicator and SAS control module
- SAS control module malfunction
System Wiring Diagram
Diagnostic Procedure
Step 1-Step 6:
Step 7-Step 8:
