B1011
DTC B1011:95
System Malfunction Location
- SAS control module connectors are poorly connected
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- No continuity between poorly connected detector bar terminals of the SAS control module
Possible Causes
- SAS control module connectors are poorly connected
- SAS control module connector malfunction
- SAS control module malfunction
System Wiring Diagram
Diagnostic Procedure
