U3003:16
DTC U3003:16/U3003:17
System Malfunction Location
U3003:16-U3003:17:
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- SAS control module power supply voltage is other than 8-15.9 V
Possible Causes
- Battery malfunction
- SAS 5 A fuse malfunction
- Open circuit or power supply short in the wiring harness between the SAS control module and body ground
- SAS control module malfunction
System Wiring Diagram
Diagnostic Procedure
