Antenna Feeder No.3 Removal/Installation

ANTENNA FEEDER NO.3 REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the rain sensor cover. (with auto light / wiper system) Service and Repair

3. Disconnect the rain sensor connector. (with auto light / wiper system) Service and Repair

4. Disconnect the auto-dimming mirror connector. (with auto-dimming mirror) Auto-Dimming Mirror Removal Auto-Dimming Mirror Installation

5. Remove the following parts:
a. Sunroof seaming welt (with sunroof system)

b. A-pillar trim A-Pillar Trim Removal/Installation

c. Upper anchor of the front seat belt Front Seat Belt Removal/Installation

d. Front scuff plate Front Scuff Plate Removal/Installation

e. Rear scuff plate Rear Scuff Plate Removal/Installation

f. B-pillar lower trim B-Pillar Lower Trim Removal/Installation

g. B-pillar upper trim B-Pillar Upper Trim Removal/Installation

h. Rear seat cushion Rear Seat Cushion Removal/Installation

i. Rear side seat back Rear Side Seat Back Removal/Installation

j. C-pillar trim C-Pillar Trim Removal/Installation

k. Map light Map Light Removal/Installation

l. Sunvisor Service and Repair

m. Assist handle Service and Repair

n. Headliner Service and Repair

6. Disconnect the connector.

7. Remove the clips A and B.






8. Remove the antenna feeder No.3.

9. Install in the reverse order of removal.