Antenna Feeder No.2 Inspection

ANTENNA FEEDER NO.2 INSPECTION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. A-pillar trim (RH) A-Pillar Trim Removal/Installation

b. Rear scuff plate (RH) Rear Scuff Plate Removal/Installation

c. Rear seat cushion Rear Seat Cushion Removal/Installation

d. Rear side seat back (RH) Rear Side Seat Back Removal/Installation

e. C-pillar trim (RH) C-Pillar Trim Removal/Installation

3. Disconnect the antenna feeder No.1.






4. Disconnect the antenna feeder No.3.






5. Verify that the continuity between antenna feeder No.2 terminals is as indicated in the table.






- If not as indicated in the table, replace antenna feeder No.3.