Starting Procedure For Diagnostic Mode [Car-Navigation System]
STARTING PROCEDURE FOR DIAGNOSTIC MODE [CAR-NAVIGATION SYSTEM]
1. Switch the ignition to ACC or ON.
2. Press the MENU switch (panel switch).
3. Select "Navigation Setup".
4. Select "Calibration".
5. Select "Map Version".
6. Press the A portion of the MAP VERSION screen two times.
7. Press the B portion of the MAP VERSION screen two times.
8. Select "Menu".
9. Select the items to be inspected from the diagnosis menu. Diagnostic Check [Car-Navigation System]
10. To stop the diagnostic mode, ignition is switched to off.