Auto-Dimming Mirror Inspection

AUTO-DIMMING MIRROR INSPECTION

1. Remove the rain sensor. (vehicles with auto light/wiper system) Service and Repair

2. Remove the rain sensor cover. (vehicles without auto light/wiper system) Service and Repair

3. Measure the voltage at each terminal (other than terminal A).

- If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under "Inspection item (s)" and related wiring harnesses.

4. Inspect the auto-dimming mirror connector for continuity at terminal A.

5. If the system does not work properly even though the inspection items or related wiring harnesses do not have any malfunction, replace the auto-dimming mirror.

Terminal Voltage Table (Reference)

Terminal Voltage Table (Reference):