Power Outer Mirror Inspection

POWER OUTER MIRROR INSPECTION



1. Disconnect the negative battery cable.

2. Remove the inner garnish. Inner Garnish Removal/Installation

3. Disconnect the power outer mirror connector.

4. Apply battery positive voltage and connect the ground to the power outer mirror terminals and inspect the power outer mirror operation.






- If the power outer mirror does not operate as indicated in the table, replace it.





5. Apply battery voltage to power outer mirror connector terminal A, and connect terminal C to ground.











- If not as indicated in the table, go to the next step.

6. Remove the mirror glass. (See Outer Mirror Glass Removal) (See Outer Mirror Glass Installation)

7. Apply battery voltage to outer mirror glass connector terminal A, and connect terminal B to ground











- If not as indicated in the table, or if the resistance is not within the specification, replace the outer mirror glass.
- If as indicated in the table, or if the resistance is within the specification, replace the power outer mirror.

8. Verify that the continuity is as indicated in the table.











- If not as indicated, replace the power outer mirror.