C. - Outer Handle Removal
C. OUTER HANDLE REMOVALUpdated information is shown with asterisks.
Outer Handle Removal for Inspection (front passenger and rear doors only).
1. Remove hole cover.
2. Loosen torx T-25 screw completely (screw does not fall off/stays in base).
3. Pull outer handle with one hand and insert fiber stick (or equivalent plastic tool).
NOTE:
Do not use metal tools (i.e. screwdriver), otherwise paint may be damaged.
IMPORTANT:
Note position of the cap hook.
4. Twist fiber stick (or equivalent plastic tool) to pop out outer handle cap.
NOTE:
Use care when removing handle cap to avoid breakage.
5. Slowly pull outer handle rearward to remove outer handle.
NOTE:
(Advanced Keyless Entry Only): Passenger front outer handle can be inspected using this procedure without disconnecting electrical connector.
6. *Proceed to "D. OUTER HANDLE AND HANDLE BRACKET INSPECTION AND DRIVER'S DOOR SECONDARY INSPECTION".*