Overhaul

INSTRUMENT CLUSTER DISASSEMBLY/ASSEMBLY

CAUTION:
- Do not drop the instrument cluster or damage the printed board. This will lead to a system malfunction.

1. Perform the instrument cluster configuration when replacing it. Programming and Relearning

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. Front scuff plate (Driver side) Front Scuff Plate Removal/Installation

b. Front side trim (Driver side) Front Side Trim Removal/Installation

c. Upper panel Upper Panel Removal/Installation

d. Decoration panel (Driver side) Decoration Panel Removal/Installation

e. Hood release lever Service and Repair

f. Meter hood Meter Hood Removal/Installation

g. Instrument cluster Removal and Replacement

4. Disassemble in the order indicated in the table.










5. Assemble in the reverse order of disassembly.