Backup Lamp Switch: Service and Repair

BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [G66M-R]

1. Disconnect the negative battery cable.

2. Remove the aerodynamic under cover No.2. Aerodynamic Under Cover No.2 Removal/Installation

3. Drain the oil from the transaxle.

4. Disconnect the back-up light switch connector and remove the back-up light switch.






5. Install in the reverse order of removal.

6. Add the specified amount and type of oil.

7. Install the aerodynamic under cover No.2. Aerodynamic Under Cover No.2 Removal/Installation