Interior Light Removal/Installation

INTERIOR LIGHT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Partially peel back the seaming welt.

3. Remove the rain sensor cover. (Vehicles with auto light/wiper system) (See Service and Repair)

4. Disconnect the rain sensor connector. (Vehicles auto light/wiper system)

5. Remove the following parts:
a. Sunroof seaming welt (vehicles with sunroof system)

b. A-pillar trims A-Pillar Trim Removal/Installation

c. Front scuff plate Front Scuff Plate Removal/Installation

d. Rear scuff plate Rear Scuff Plate Removal/Installation

e. B-pillar lower trims B-Pillar Lower Trim Removal/Installation

f. Upper anchor of the front seat belt Front Seat Belt Removal/Installation

g. B-pillar upper trims B-Pillar Upper Trim Removal/Installation

h. Rear seat cushion Rear Seat Cushion Removal/Installation

i. Rear side seat back Rear Side Seat Back Removal/Installation

j. C-pillar trims C-Pillar Trim Removal/Installation

6. Disconnect the auto-dimming mirror connector. (vehicles with auto-dimming mirror)

7. Remove the sunvisors. (See Service and Repair)

8. Remove the map light. (See Map Light Removal/Installation)

9. Remove the assist handle. (See Service and Repair)

10. Remove the headliner Service and Repair

11. Disconnect the interior light connector.






12. Detach the tab and remove the interior light.

13. Install in the reverse order of removal.