Lighting System Personalization Features Setting Procedure

LIGHTING SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE

Auto light system / auto light-off system

NOTE:
- Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the PERSONALIZATION FEATURES SETTING PROCEDURE.

1. Connect the M-MDS to the DLC-2.






2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

- Select the "Module Programming"

3. Then, select items from the screen menu in the following order.

- Select "Programmable Parameters"
- Select "Exterior Lighting"

4. Select the item name, and then select option.






Room light control system / turn light system

- For the room light control system / turn light system, refer to the control system personalization features setting. Programming and Relearning