B1925
DTC B1925, B1933, B1935, B1938
System Malfunction Location
B1925-B1938:
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Resistance other than 1.3-4.7 ohms detected in passenger-side air bag module (inflator No.1) circuit
- Malfunction in the wiring harness between the passenger-side air bag module (inflator No.1) and SAS control module
Possible Causes
- Passenger-side air bag module connector malfunction
- Open or short circuit in the wiring harness between the passenger-side air bag module and SAS control module
- Passenger-side air bag module (inflator No.1) malfunction
- SAS control module malfunction
System Wiring Diagram
Diagnostic Procedure
Step 1:
Step 2:
