B2433
DTC B2433, B2434
System Malfunction Location
B2433-B2434:
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure
- Malfunction in the wiring harness between the driver-side buckle switch and SAS control module
- Malfunction in driver-side buckle switch circuit
Possible Causes
- Driver-side buckle switch connector malfunction
- Open or short circuit in the wiring harness between the driver-side buckle switch and SAS control module
- Driver-side buckle switch malfunction
- SAS control module malfunction
System Wiring Diagram
Diagnostic Procedure
Step 1:
Step 2:
